Products
-
High Quality Concrete Formwork Accessories Steel Snap Tie
The snap tie wedge is a holding device that is fabricated from high strength galvanized steel that is used in a double waler or double strong back snap tie forming application to ensure proper load distribution when installed.Snap Ties are designed to easily tie lumber forming systems.
-
Formwork Accessories Galvanized Bolt Round Head Pin and Wedge
Galvanized Wedge Pin Concrete aluminium Concrete Formwork Accesories Wedge Pin Stub Pin for construction to connect, The thin two-sided area is very small, and Wedge pin is difficult to accurately apply force when striking. Wedge pin needs to be repeatedly,struck with the help of other tools. In the process, wedge pin is easy to smash and cause damage to the surface of the aluminum mold.
-
Construction Edge Protection Adjustable Screw Parapet Safety Guard Rail
Roof guardrails are perfect passive fall protection system. Roof railling can keep personal safe, and supply temporary and permanent protection. Roof guardrail can be installed on flat/low edges, over gravel stops, on parapet walls and even on concrete slab overhangs. To provides a secure barrier around the rooftop, tight areas, and along the roof edge.
-
Scaffold Guard Rail Safety Adjustable Clamp Post edge protection
Adjustable Screw Parapet Guradrail for Scaffolding Safety, Working at height on a scaffold requires edge protection to prevent falls. Any scaffolding safety inspection should include checking that the guardrails are correct and in position. Different types with different diameters are also available.
-
Construction Tools Formwork Accessories Shuttering F Clamp
Formwork Shuttering F Clamps consist of a hook head steel rod and a loose but captive clip. The design of Formwork Shuttering F Clamps is very simple,no bolt or nut required,highly selflock. Formwork Shuttering F Clamps is used to clamp formwork timber batten from two contrary sides. Formwork Shuttering F Clamps can prevents breakage of formwork,thus keep concrete structure in good shape without discoloration. Beside ease of assembly and removal,Steel Formwork Shuttering F Clamps can save lots of constructoin cost.
-
Tie Rod System Formwork Galvanized Square Washer Plate
Formwork waller plates are made of Q235 steel, they are usually used together with formwork tie rods to protect the formwork system.With various size and weight, our formwork waller plates have different tensile strength and can match tie rods of various sizes.
-
Construction Concrete Formwork Accessories Steel Tie Rod
Tie Rod are part of Formwork accessories that find application in scaffolding applications at construction sites. In the area of scaffolding, these tie rod assemblies find application in bracing steel columns/heavy timber beams and for supporting canopies/awnings.
Tie Rod have a cut threading and are available in 1M 3M 6M length or as required. -
Construction Formwork Accessories Tie Rod Casting Hex Nut
Formwork tie rod nut is an important part of tie rod system. the hex nut mainly plays fastener role in the process of formwork assembly. The raw material is 45# steel or Ductile casted iron QT450-10, and its manufacturing technique is casting. Other fittings used together maybe: wing nut, anchor nut, water stopper nut, steel cone nut, plate, etc.
-
Formwork Accessories Steel Climbing Cone Nut
Formwork Tie Rod Nut is a kind of important accessories in pouring shear wall project. Formwork cone nut together with the Tie Rod, they act as wall tie system, to fasten the formwork panels tightly during concrete pouring process. They can also be used in other applications for fasten purpose. We manufacture all types of Tie rod nut with good quality !
-
High Quality Metal Building Materials Formwork Accessories formwork wall tie
Formwork Accessories Flat Tie is a key component used to strengthen the aluminum formwork in the aluminum formwork system. Formwork Accessories Flat Tie main function is to hold the aluminum formwork on both sides tightly during the concrete construction, prevent the problems such asmold expansion and mold explosion in the construction process, and ensure the construction quality.Commonly used material high-strength steel.
-
Formwork Accessories Galvanized Formwork U Clips
U clips are a widely uesd formwork building materials. With its thread structure, U clips can be easily installed by hand or some regular tools. U clips have casting and forging types by processing technology,the size can be produced by your customed. Material can use Q235 carbon steel, 45# steel,alu and so on. The surface treatment have galvanized, zinc-plated and
natural color. Any kind U clips can be produced to meet your needs. -
Construction Formwork Accessories Zinc-plated Tie Rod Wing Nut
A tie nut, also known as a wing nut or form tie nut, is a component used in formwork systems during the construction of concrete structures. Tie Rod Wing Nut plays a key role in securing the formwork panels together and holding them in place while concrete is poured and cured. Tie nuts are typically used in conjunction with tie rods or form ties to create a stable and strong formwork assembly.
-
Building Construction Formwork Tie Rod Galvanized Wing Nut
Formwork Wing nuts are made of ductile cast iron , they are used together with tie rod and washer plate for concrete wall shuttering system. With various size and weight , our formwork wing nuts can match different formwork tie rod, and when making tensile strength testing, usually, when the tie rod breaks, the wing nuts still keeps well.
-
Formwork Accessories Tie Rod Swivel Wing Nut
Swivel Wing Nut is widely considered ideal to use in different domains for fastening applications. This range of nuts is precisely manufactured by making use of finest quality materials like cast iron, carbon steel and mild steel. These nuts are widely treasured in this domain for their easy tightening and loosening applicability.
-
Concrete Formwork Tie Rod Galvanized Scaffolding Wing Nut
Swivel Wing Nut is widely considered ideal to use in different domains for fastening applications. This range of nuts is precisely manufactured by making use of finest quality materials like cast iron, carbon steel and mild steel. These nuts are widely treasured in this domain for their easy tightening and loosening applicability.Formwork wing nut tie rods are steel rods that help secure and stabilize formwork during concrete casting. They are essential in construction projects to ensure that concrete structures are built safely and securely
-
Formwork Tie Rod System Formwork Accessories Casting Water Barrier Nut
Formwork water stoppers nut are used in water retaining structures. Cast into the concrete wall between two separate tie bars.After pouring, tie rods are removed, the water barrier remains in situ. Allow two reducers per water barrier. Our formwork water stopper nut has various size and shape, customized is also available.
-
Formwork Accessories Heavy Duty Formwork BFD Clamp
Galvanized Steel Formwork BFD Clamps is accessories of the scaffolding productions, it is made of S355JR steel material,the production technology can be forging or prssed , with the development of the construction , the scaffolding formwork BFD clamp has become more and more popular. Steel Galvanized Scaffolding Forged Formwork BFD Clamp used to connect conceret formwork buliding tower, formwork BFD clamp used in buliding construction site. Formwork BFD Clamps can bear pressure on horizontal and leverl direction.
-
Formwork Accessories Adjustable Formwork Panel Clamp
The Formwork Clamp ensures neat panel joints resulting in perfect concrete finishes.With only one component, every panel connection is flush, aligned and tight.The Formwork Clamp guarantees strong joints and fast assembly of the panels.This is the main component used to join formwork panels. With one single strike of the hammer, it can be used to make panel connections tight joint, no any concrete leak.The Formwork Clamp ensures a flexurally stiff connection of panels and allows large units to be moved.
-
Building Materials Formwork Pressed Spring Rapid Clamp
Spring Rapid Clamp is used for setting up the wooden or steel framework for concrete casting. Spring Rapid Clamp is used in pair on opposite sides of shutter to hold the tie-rod. The second Rapid Clamp is applied to the other end of the rod and locked in position like the first, after the rod is tensioned using appropriate Rapid Tensioner.
-
Steel Pressed Formwork Spring Clamp Tensioner for Concrete Construction
The Spring clamp tensioner ensures neat panel joints resulting in perfect concrete finishes.With only one component, every panel connection is flush, aligned and tight.The Formwork Clamp guarantees strong joints and fast assembly of the panels.This is the main component used to join formwork panels. With one single strike of the hammer, it can be used to make panel connections tight joint, no any concrete leak.The Formwork Clamp ensures a flexurally stiff connection of panels and allows large units to be moved.
-
Formwork Accessories Beam Spring Rapid Clamp
The rapid clamps represent the fastest, most economical and safest way for locking and sealing traditional wooden formwork during the casting concrete. The rapid clamps implementation and their disarmament are simple and very quick. The rapid clamps wedge is made of hardened steel; with RAPID clamps is averted any danger of armor and collaps and jets are always perfectly straight.