Formwork system
-
Formwork Anhor Plate Forged Round Swivel Wing Nut
Formwork Tie Rod Nut is a kind of important accessories in pouring shear wall project. Together with the Tie Rod, they act as wall tie system, to fasten the formwork panels tightly during concrete pouring process. They can also be used in other applications for fastening purpose.We manufacture all types of Tie rod nut with super good quality !
-
Aluminium formwork waller bracket pipe clamp for construction
Waler Bracket is the most rigid in the market. Simply insert the Waler Bracket into any side rail slot not being used for ties, place a single or double 2″x4″ piece of lumber on top of the bracket and drop the wedge to tighten. We specialize in formwork and scaffolding for many years. We can offer you the best price by matching your specific need and requirement.We are looking forward hearing from you, please feel free contact us for further details.
-
Water Barrier Construction Building Material EN74 Tie Rod
Formwork water stoppers are used in water retaining structures. Cast into the concrete wall between two separate tie bars. After pouring, tie rods are removed, the water barrier remains in situ. Allow two reducers per water barrier. Our formwork water stopper has various size and shape, customized is also available.
-
Aluminum Formwork Concrete Accessories One Piece Waler Clamp
Waler Bracket is the most rigid in the market. Simply insert the Waler Bracket into any side rail slot not being used for ties, place a single or double 2″x4″ piece of lumber on top of the bracket and drop the wedge to tighten.
-
concrete formwork wall bracing turnbuckle form aligner
Turnbuckle Form Aligber The turnbuckle section of the aligner features a 1″ diameter self-cleaning coil thread for fast adjustments. Overall length of the aligner is 35″ minimum and 39″ maximum, offering 4″ of effective adjustment. Turnbuckle Form Aligner has a bent nailing plate equipped with nail holes for nailing to forms and a 15/16″ hole to accept 3/4″ or 7/8″ round steel stakes when using the bracket from the ground up. Aligner can be used repeatedly when cleaned of any concrete after use. The safe working load of the aligners is limited by the lumber, nailing and/or staking methods.
-
Manufacture Steel Plywood Formwork for Concrete Wall Forms
Steel Ply Forming System is very popular for wall concrete construction. Conveniently located handles make set up, stripping and handling easier. With proper care contractors can expect that forms will be able to be reused up to 200 times before plywood needs to be replaced. Compatible with all other industry standard modular handset systems. All sizes of heavy duty loop ties, x-flat ties, wedge bolts, and accessories to offer the complete system.
-
Concrete Steel Formwork Tie Rod Formwork Accessories
Tie Rod are part of Form-work accessories that find application in scaffolding applications at construction sites. In the area of scaffolding, these tie rod assemblies find application in bracing steel columns/heavy timber beams and for supporting canopies/awnings. They have a cut threading and are available in 1M 3M 6M length or as required. Tie rods are threaded along their entire length, to allow the bear to be cut to the Required length on site, as necessary. We offer precisely manufactured Tie Rod. Fabricated from high-grade material, strong emphasis is laid on the rolling of coil, to ensure optimum performance in diverse working conditions.
-
concrete formwork Cast Iron climbing cones nut
We provide full series of scaffolding parts, we have exported to many countries. Our customers includes Wholesaler, Manufacturer, etc., our scaffolding parts enjoys high reputation due to the premium quality.In addition, we also support the customization of various sizes, materials and finishes.We have 10 years of production experience, the product is durable and cheap, by many new and old customers in the United States,Russia,Korea,Britain and so on.
-
Construction Formwork Accessories Galvanized Steel Formwork Tie Rod
Formwork Tie Rod, The function of a formwork tie rod, is to securely connect the inner and outer formwork panels during the construction of walls, particularly concrete walls. It ensures that the formwork remains stable and aligned during the pouring and curing process of the concrete, preventing any bulging or misalignment of the wall structure.
-
Aluminium Concrete Formwork Accessories Wedge Pin Stub Pin For Construction
Galvanized Wedge Pin Concrete aluminium Concrete Formwork Accesories Wedge Pin Stub Pin for construction to connect， The thin two-sided area is very small, and it is difficult to accurately apply force when striking. It needs to be repeatedly，struck with the help of other tools. In the process, it is easy to smash and cause damage to the surface of the aluminum mold.
-
Concrete Formwork Accessories Tie Rod System
Formwork Tie Rod Nut is a kind of important accessories in pouring shear wall project. Together with the Tie Rod, they act as wall tie system, to fasten the formwork panels tightly during concrete pouring process. They can also be used in other applications for fastening purpose.We manufacture all types of Tie rod nut with super good quality !
-
Building Construction Formwork Panel Clamp DOKA Clamp
Formwork Clamp is a high-strength concrete forming system designed for fast-paced gangform operations. It has the strength required for the large contact areas and fast pour rates common in large gangform applications.
-
Concrete Forms Wall Tie Snap Tie With Plastic Cone
Snap Ties are manufactured with integral heads, and Metal or Plastic Form Spreaders. Snap Ties are designed to easily tie lumber forming systems. Snap Ties have a nominal 1″ breakback. Each Tie incorporates an anti-turn device in order to properly break after use.Long End, Short End, and Odd End Snap Ties for plywood forming. Available with 1″ x 1″ cones (plastic), washers (metal) and water resistant seal options.
-
Construction Building Material Formwork Casting Hex Nut
Tie Rod system accessories are always be an important part in the concrete construction field. Our factory produces various formwork accessories in concrete construction. Traditional manufacturing process, modern production mode make the products quality better and better. Tie rods, anchor nuts, formwork wing nuts, jack nuts, wedge clamps and other accessrories are all in stock. The specific shapes and weight of products can also be customized by customer’s needs.
-
High Quality Formwork Accessories Rapid Clamp Tensioner
The Rapid clamp tensioner ensures neat panel joints resulting in perfect concrete finishes.With only one component, every panel connection is flush, aligned and tight.The Formwork Clamp guarantees strong joints and fast assembly of the panels.This is the main component used to join formwork panels. With one single strike of the hammer, it can be used to make panel connections tight joint, no any concrete leak.The Formwork Clamp ensures a flexurally stiff connection of panels and allows large units to be moved.
-
High Quality Steel Prop Accessories Threaded Sleeve Nut
Steel prop Sleeve nut is made by threading rolling machine in our factory, the outer diameter is 60mm, thickness 3.5mm, black or zinc plated finishing.Steel shoring props are adjustable for the length, and used for formwork shoring system. One unit of steel prop is including: base plates, cup nut or sleeve and iron casting nut, G pin. We can offer you the best price by matching your specific need and requirement.We are looking forward hearing from you.
-
Formwork Accessories Concrete Column Form Clamps Square Column Buckle
Formwork Column Clamp are quickly adjusted and secured to ensure positive clamping of steel and timber formwork for Concrete Columns. Column Clamp are designed to cramp the formwork tightly together at the corners. Column Clamp is very convenient during wall concrete formwork construction.The adjustable column clamp can be fitted on the column by taking the wedge into the overlapping slots.
-
Adjustable Galvanized Steel Electric Beam Clamp
Adjustable beam clamps are design only for beam formwork construction. It is appliable to steel, aluminum, timber and even plastic column formwork. Each size of clamps cover have cover up to 300mm size with every millimeter increment (eg: 200-400mm and 400-600mm), By applying this accessories, it helps your worker to skip the works for tie rods and plastering work after formwork strip off. Hence, the concrete beam has a better finishing, the timber panel strip off without holes which means reusing time are more for the formwork panel.
-
H20 Beam for Concrete Formwork Construction Beams Clamp
Beam Clamp is widely used in timber beam formwork to connect steel waling and h20 timber beams and fix them tight during the whole project duration.Beam Clamp is a high-strength concrete forming system designed for fast-paced gangform operations. Beam Clamp has the strength required for the large contact areas and fast pour rates common in large gangform applications.
-
For Timber Beam and Steel Waler Connection Galvanized Beam Clamp
For Timber Beam and Steel Waler Connection Galvanized Beam Clamp.Beam Clamp widely used for many industries, such as construction, vehicle, railway, furniture and some other precision industries.Beam Clamp have different materials, length, threads, surface treatment. Welcome to contact us for details.
-
Formwork Accessories Beam Spring Rapid Clamp
The rapid clamps represent the fastest, most economical and safest way for locking and sealing traditional wooden formwork during the casting concrete. The rapid clamps implementation and their disarmament are simple and very quick. The rapid clamps wedge is made of hardened steel; with RAPID clamps is averted any danger of armor and collaps and jets are always perfectly straight.
